Duerkopp Adler HP Series Additional guide Manual de usuario descargar pdf (Pagina 68)

EFKA AB220A/320A FP220A/320A

Technician Level

Code no. 190 with control operation

Code no. 1907 with control panel operation

Parameter Designation Unit max min Preset Ind.

132 LSS 0 = Machine start possible with light barrier 1 0 0 *) A/A/A/A

uncovered or covered.

1 = Machine start blocked with light barrier

uncovered if parameter 131 = 1.

Machine start blocked with light barrier

covered if parameter 131 = 0.

133 LSE Thread trimming operation, when completing the seam 1 0 1 *) A/A/A/A

after light barrier sensing On/Off

134 SSt Softstart On/Off 1 0 0 *) A/A/A/A

135 SrS Ornamental backtack On/Off 1 0 0 A/A/A/A

136 FAr 0 = Trimming stitch backward Off 2 0 0 C/C/C/B

1 = Trimming stitch backward On with single end

backtack

2 = Trimming stitch or positioning stitch at the seam end

always backward

137 hP High lift for walking foot On/Off 1 0 0 A/A/A/A

139 nIS Display of machine speed On/Off 1 0 0 *) A/A/A/A

141 SGn Speed status for the seam with stitch counting 4 0 0 A/A/A/A

0 = Speed controllable by the pedal up to the set

maximum speed (parameter 111)

1 = Fixed speed (parameter 118) without influence by

the pedal (machine stop by pressing the pedal

to the basic position)

2 = Limited speed controllable by the pedal up to the

set limit (parameter 118)

3 = At fixed speed (parameter 118) can be interrupted

by full heelback

4 = At fixed speed (parameter 110) can be interrupted

by full heelback.

142 SFn Speed status for the free seam and for the seam with 3 0 0 A/A/A/A

light barrier

0 = Speed controllable by the pedal up to the set

maximum speed (parameter 111)

1 = Fixed speed (parameter 118) without influence by

the pedal (machine stop by pressing the pedal

to the basic position)

2 = Limited speed controllable by the pedal up to the

set limit (parameter 118)

3 = At fixed speed (parameter 118) can be interrupted

by full heelback (only for seams with light barrier).

143 kSA Stitch counting at the start of the seam (e. g. chain 3 0 0 A/A/A/A

suction

0 = Speed controllable by the pedal up to the set

maximum speed (parameter 111)

1 = Fixed speed (parameter 112) without influence by

the pedal (machine stop by pressing the pedal

to the basic position)

2 = Limited speed controllable by the pedal up to the

set limit (parameter 112)

3 = At fixed speed (parameter 112), can be suspended

or interrupted depending on the setting of

parameter 019.

144 kSE Stitch counting at the seam end (e. g. chain suction) 3 0 0 A/A/A/A

0 = Speed controllable by the pedal up to the set

maximum speed (parameter 111)

1 = Fixed speed (parameter 113) without influence by

the pedal (machine stop by pressing the pedal

to the basic position)

2 = Limited speed controllable by the pedal up to the

set limit (parameter 113)

3 = At fixed speed (parameter 113), can be suspended

or interrupted depending on the setting of

parameter 019.

*) Depending on the selected mode. See table at the beginning of the List of Parameters!

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 87 88

Comentarios a estos manuales

Sin comentarios

Duerkopp Adler HP Series Additional guide Manual de usuario Pagina 68

Comentarios a estos manuales

Relacionado con productos y manuales para Máquinas De Coser Duerkopp Adler HP Series Additional guide