Duerkopp Adler HP Series Additional guide Manual de instrucciones Pagina 80

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 79
EFKA AB220A5111
80
8 Error Displays
General Information
On the control On the V810 On the V820 Signification
A1 InF A1 InFo A1 Pedal not in neutral position, when turning
the machine on
A2 -StoP- blinking -StoP- blinking + Machine run blockage
symbol display
A3 InF A3 InFo A3 Reference position is not set
A7 Symbol blinking Symbol blinking Bobbin thread monitor
Programming Functions and Values (Parameters)
On the control On the V810 On the V820 Signification
Returns to 000 Returns to 0000 Like V810 + Wrong code number or parameter number
or to last or to last display InFo F1 input
parameter number parameter
number
Serious Condition
On the control On the V810 On the V820 Signification
E1 InF E1 InFo E1 After power On, position transmitter or
commutation transmitter defective, or
connecting cables have been changed by
mistake. During operation or after a sewing
cycle, only position transmitter defects can
be identified.
E2 InF E2 InFo E2 Line voltage too low, or time between power off
and power on too short.
E3 InF E3 InFo E3 Machine blocked or does not reach the desired
speed.
E4 InF E4 InFo E4 Control disturbed by deficient grounding or
loose contact.
E9 InF E9 InFo E9 EEPROM defective.
Hardware Disturbance
On the control On the V810 On the V820 Signification
H1 InF H1 InFo H1 Commutation transmitter cord or frequency
converter disturbed.
H2 InF H2 InFo H2 Processor disturbed
Vista de pagina 79
1 2 ... 75 76 77 78 79 80 81 82 83 84

Comentarios a estos manuales

Sin comentarios