Duerkopp Adler HP Series Additional guide Manual de instrucciones descargar pdf (Pagina 64)

EFKA AB220A5111

Technician Level

Code no. 190 with control operation

Code no. 1907 with control panel operation

Parameter Designation Unit max min Preset Ind.

173 Sr4 Checking of the signal outputs and inputs using the

incorporated control panel or the V810/V820 control

panels

01 = Backtacking on socket ST2/34

02 = Sewing foot lift on socket ST2/35

03 = Output M1 on socket ST2/37

04 = Output M3 on socket ST2/27

05 = Output M2 on socket ST2/28

06 = Output M4 on socket ST2/36

07 = Output M5 on socket ST2/32

08 = Output M11 on socket ST2/31

09 = Output M6 on socket ST2/30

10 = Output M9 on socket ST2/25

11 = Output M8 on socket ST2/24

12 = Output M7 on socket ST2/23

13 = Output M10 on socket ST2/29

OFF/ON = By actuating the switches connected to the

control, the function of these switches is

checked and displayed on the control.

OFF is displayed with open switch and the

activated input in1...i10 with closed switch.

179 Sr5 Control program number with index and identification

number. Upon pressing the appropriate key the data

will be displayed in succession.

V810 control panel display example:

Press the E key è Display e. g. Sr [°]

Press the >> key è Display e. g. 5111A

Press the E key è Display e. g. 010823

Press the E key è Display e. g. 15

Press the P key twiceè Display Ab220A

V820 control panel display example:

Press the E key è Display F-179 Sr5 [°]

Press the >> key è Display e. g. 5111A

Press the E key è Display e. g. 01082315

Press the P key twiceè Display 4000 Ab220A

See instruction manual for control display example.

180 rd Number of reversing increments degrees 359 0 175 *) A

181 drd Switch-on delay of reverse motor rotation ms 990 0 10 *) A

182 Frd Reverse motor rotation On/Off 1 0 0 *) A

183 FFm Disabling of flip-flop functions at the seam end 3 0 0 A

0 = Flip-flop 1 (M6) and flip-flop 2 (M10) not disabled

at the seam end

1 = Flip-flop 1 (M6) disabled at the seam end

2 = Flip-flop 2 (M10) disabled at the seam end

3 = Flip-flop 1 (M6) and flip-flop 2 (M10) disabled

at the seam end

184 c6 Number of run-out stitches when unlocking the stitches 254 0 20 *) A

chain

185 chP Stitch counting high lift for walking foot stitches 254 0 0 A

186 FFi Function “speed limitation n11” 1 0 0 *) A

0 = Speed limitation n11 On, when signal M10 is On.

Speed limitation n11 Off, when signal M10 is Off.

1 = Speed limitation n11 Off, when signal M10 is On.

Speed limitation n11 On, when signal M10 is Off.

187 FFo Function of signal M10 after “power On” (flip-flop 2) 1 0 0 *) A

on socket ST2/29

0 = Signal M10 Off / speed limitation n11

according to setting of parameter 186

1 = Signal M10 On / speed limitation n11

according to setting of parameter 186

*) Depending on the selected mode. See table at the beginning of the List of Parameters!

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Comentarios a estos manuales

Sin comentarios

Duerkopp Adler HP Series Additional guide Manual de instrucciones Pagina 64

Comentarios a estos manuales

Relacionado con productos y manuales para Máquinas De Coser Duerkopp Adler HP Series Additional guide