Duerkopp Adler FLP Series Additional guide Manual de servicio descargar pdf (Pagina 62)

Set-up

Operating manual 281 Version 06.0 - 05/201360

7.9 Attaching the upper section retaining strap

The machine upper section is secured with a retaining strap so

that it does not slip out of the brackets when being folded over

backwards.

Figure 37: Attaching the upper section retaining strap

1. Tilt the machine upper section backwards.

2. Pull the retaining strap (1) from the machine upper section

through the cut-out and under the table plate.

3. Screw the retaining strap (1) firmly to the flap (2) for the oil

pan (3) using a screw.

7.10Attaching the oil can

Figure 38: Attaching the oil can

1. Tilt the machine upper section backwards.

2. Attach the oil can (2) into the oil pan (1) from below.

(1) - Retaining strap (2) - Flap

(3) - Oil pan

①②③

(1) - Oil pan (2) - Oil can

②

①

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 73 74

Sin comentarios

Duerkopp Adler FLP Series Additional guide Manual de servicio Pagina 62